configure network-clock ptp end-to-end transparent

configure network-clock ptp end-to-end-transparent [add | delete] ports port_list {one-step}

Description

Adds or deletes the physical port(s) to or from the end-to-end-transparent clock.

Syntax Description


add	Add ports.
delete	Delete ports.
ports	Physical ports.
`port_list`	List of ports to be added or deleted.
one-step	One step operation.

Default

N/A.

Usage Guidelines

Use this command to add or delete the physical port(s) to, or from, the end-to-end-transparent clock. The fiber only 1G ports, 10G ports, and stack ports cannot be added to the End-to-End transparent clock.

Example

The following example configures end-to-end transparent clock on the front panel ports:

# configure network-clock ptp end-to-end-transparent add ports 1-4 one-step

The following example deletes the front panel ports from the end-to-end transparent clock:

# configure network-clock ptp end-to-end-transparent delete ports 2-4

History

This command was first available in ExtremeXOS 15.1.

Platform Availability

This command is available on the ExtremeSwitching 5420, 5520 and 5720 platforms.

Note

PTP commands can be used only with the Premier license pack.